Holiday Maker Fest 2020

Welcome to Holiday Maker Fest 2020! 

I am so excited to finally be able to share my pine wood holiday with everyone! You will find a supply list, measurements and the free SVG for this Santa! I ask that you please do not share my hand drawn Santa with others. This is just for Holiday maker fest folks! I hope you all have as much fun making your own box and I had making mine! 

​

SUPPLIES

​

• Safety glasses 

• Tape Measure

• pencil 

• Table Saw - We used Dewalt with a built in tape measure but any table saw will work!​

• Small hand sander

• Sand paper

  • 120 Grit​

  • 220 Grit

• Wood glue

• Clamps

• Paper towels

• Nail gun (this is optional) 

• Scrap piece of wood

• Stain in your color choice

• Stain application pad or old sock

• Gloves

• Something to protect the surface you are staining on

• Sponge brush

• polycrylic - NOT polyurethane 

• Free SVG Santa below

• Vinyl - Or Stencil vinyl 

• Transfer tape

• Acrylic paint

• Small wooden craft balls

• Drill and drill bit

• Small screw (this will be based on your ball size and wood thickness)

• Decorative elements for inside your box (be creative!)

​

​

​

​

​

Measurements for the box are as follows

Three pieces at 6 inches high and 24 inches long

two pices at 5 3/4 inches high and long

you will want to be sure to check the ends of your box like it shows in the video for proper sizing of your wood. depending on your woods thickness your side pieces may be a slightly different measurement than mine were. 

​

GET YOUR FREE SVG HERE 

​